$$6,495.00Cisco Systems \ Routers \ ASR1K Series RoutersASR1000-ESP40
ASR1000-ESP40-RF

Cisco Systems

ASR1000-ESP40 ASR 1000 Series 40-Gbps Embedded Services Processor

Cisco ASR1000 Embedded Services Processor, 40G

Cisco SystemsCisco ASR1000-ESP40

Cisco Systems

ASR1000-ESP40 ASR 1000 Series 40-Gbps Embedded Services Processor

Cisco ASR1000 Embedded Services Processor, 40G

Item #: ASR1000-ESP40-RF

Mfg Part #: ASR1000-ESP40

Specifications
General
Item #ASR1000-ESP40-RF
Mfg Part #ASR1000-ESP40
Dimensions (L/W/H)22x22x6
Weight10 lbs
MSRP$40,000.00
BrandCisco Systems
Description

Cisco ASR 1000 Embedded Services Processor 40Gbps

ASR1000-ESP40

Product Overview

The Cisco® ASR 1000 Series Embedded Services Processors (ESPs) handle all the network data-plane traffic-processing tasks of Cisco ASR 1000 Series Aggregation Services Routers. These ESPs allow the activation of concurrent enhanced network services, such as cryptography, firewall, Network Address Translation (NAT), quality of service (QoS), NetFlow, and many others while maintaining line speeds. Figure 1 shows the Cisco ASR 1000 Series ESP 100 and ESP 200.

Cisco ASR 1000 Series Routers are placed at the WAN edge of your enterprise data center or large office, as well as in service provider points of presence (POPs). The routers rely on the power of the ESPs to aggregate multiple traffic flows and network services, including encryption and traffic management, and forward them across WAN connections at line speeds. With router options that run from 2.5 to 200 Gbps, the Cisco ASR Family contains many models and licensing options to meet the speed and budget requirements of different types of organizations and various-sized locations.

The Cisco ASR 1000 ESP components of these routers accelerate service delivery using parallel processing. The ESPs are based on the Cisco Flow Processor (FP) for next-generation forwarding and queuing in silicon. They operate at 2.5-, 5-, 10-, 10-N-, 20-, 40-, 100-, and 200-Gbps data-plane forwarding throughput rates. Together, the Cisco ASR 1001-X and ASR 1002-X Routers and 100- and 200-Gbps ESPs introduce the second generation of the Cisco FP hardware and software architecture. With FP-based ESPs at their core, ASR 1000 Routers accomplish the following:

?   Handle all baseline packet routing operations, including MAC address classification, Layer 2 and Layer 3 forwarding, QoS classification, and NetFlow packet accounting

?   Perform advanced services such as IP Security (IPsec) encryption, Network Address Translation (NAT), firewall, AppNav, Cisco Application Visibility and Control (AVC), Performance Routing (PfR), and Locator ID Separation Protocol (LISP); they offer diverse feature Layer 2 connectivity options such as Ethernet over MPLS (EoMPLS), Virtual Private LAN Services (VPLS), Overlay Transport Virtualization (OTV), and Virtual Extensible LAN Services (VXLAN)

Platform Overview

?   Cisco ASR 1000 Series 40-Gbps Embedded Services Processor

  Cisco ASR 1000 Series 40-Gbps ESP (ASR1000-ESP40) Compatible Hardware

Product Name

Part Number

Cisco ASR 1004 Router Chassis

ASR1004

Cisco ASR 1006 Router Chassis*

ASR1006

Cisco ASR 1006-X Router Chassis*

ASR1006-X

Cisco ASR 1009-X Router Chassis*

ASR1009-X

Cisco ASR 1013 Router Chassis*

ASR1013

Cisco ASR 1000 Route Processor 2, 8GB DRAM

ASR1000-RP2

Cisco ASR 1000 SPA Interface Processor 10

ASR1000-SIP10

Cisco ASR 1000 SPA Interface Processor 40

ASR1000-SIP40

Cisco ASR 1000 Fixed Ethernet Line Card, 6x10GE

ASR1000-6TGE

Cisco ASR 1000 Fixed Ethernet Line Card, 2x10GE + 20GE

ASR1000-2T + 20GE

 

Features and Benefits

The main engine of the ESP is the Cisco FP, the industry’s first programmable and application-aware network processor. The Cisco FP forms the overall hardware and software architecture of the ESP. It consolidates up to 256 customized packet-processor cores (900 MHz to 1.5 GHz) into a single processor. The parallel processing capability eliminates the need for additional service blades inside the router, because all processing is performed on the FP. As a result, the ESPs enable the ASR 1000s to support the following functions and features with high performance:

?   Forwarding, traffic management, and services

?   Large-scale parallel processing with centralized shared memory to achieve low-latency packet processing

?   High-performance deep-packet inspection (DPI) with full visibility into the entire Layer 2 frame, including payload

?   Rapid feature development with ANSI-C software development framework

?   Up to 40-Gbps system throughput and up to 130 millions of packets per second (mpps) to address WAN aggregation needs

?   Hardware-assisted cryptographic performance to yield up to 78 Gbps of throughput to enable secure WAN access and compliance

?   Line-speed zone-based firewall that provides up to 40 Gbps of throughput and 6-mpps firewall sessions

?   DPI, Cisco IOS® Software Zone-Based Firewall distributed denial of service (DDoS) detection and prevention, and control-plane protection

?   Cisco Session Border Control (SBC) for terminating and interconnecting media terminations with full accounting and flow control

?   Cisco Multicast Visual Quality Experience (VQE) and video Call Admission Control (CAC) for enhanced user experiences

?   Hardware-accelerated traffic classification and traffic shaping with support for up to 464,000 queues

?   Flexible traffic prioritization and efficient WAN bandwidth use with minimum, maximum, and excess bandwidth allocation with priority propagation

Return Policy

 

NETTECH ENTERPRISES, INC. RETURN GUIDELINES

All returns require an RMA (Return Merchandise Authorization) number, which can be obtained by contacting
our Customer Service department or clicking the “My Account” button in the top-right hand corner of our web page.

Please save all packaging and accessories for any item that is returned to Nettech. All original equipment, components, manuals,
cables, documents and packaging must be returned with your item in order for Nettech to process your RMA. An item
returned for a replacement may be repaired or replaced at Nettech’s discretion, unless otherwise required by law. Products with specific refund and return policies and deadlines must be returned within the time periods specified for each item. Physically damaged items cannot be returned.

Standard Nettech Corp Return Policy and Warranty

Products sold by Nettech are covered by our Standard Return Policy, unless otherwise indicated. Merchandise under our Standard Return Policy may be returned within 30 days of the original invoice date for a refund, or within 120 Days of the original invoice date for a replacement. All returns require an RMA (Return Merchandise Authorization) number.

Many manufacturers offer additional factory coverage; you should contact the manufacturer of your item directly for information regarding eligibility and specific Terms and Conditions.

ADDITIONAL RMA TERMS

Physical Damage Policy

Physically damaged items cannot be returned to Nettech, Corp.

Physical damage includes (but is not limited to) improper handling and any other type of damage sustained by irregular use.

If you return any physically damaged item to Nettech, the item will be returned to you at your expense.

Out-of-Stock (Back-Order) Items

Sometimes items are returned to Nettech after the product has been discontinued. You will be notified via email with two options: either Nettech can send you a comparable replacement item, or a refund of the current market value of the product will be issued. A current-market-value refund may not exceed the original invoice price. If the item is returned within 30 days of the original invoice date, a full refund will be issued.

You might be interested in these items