$$11,994.95In stockCisco Systems \ Routers \ ASR9K Router SeriesA9K-RSP440-TR-RF
A9K-RSP440-TR

Cisco Systems

A9K-RSP440-TR Route Switch Processor

ASR9K Route Switch Processor with 440G/slot Fabric and 6GB (TR) Transport Model

Product Overview The Cisco ASR 9000 Series Route Switch Processor 440 (RSP 440) is a main system processor for Cisco ASR 9000 Series. It supports scalable, low-power, next-generation platforms, as well as required by toda
Cisco SystemsCisco A9K-RSP440-TR

Cisco Systems

A9K-RSP440-TR Route Switch Processor

ASR9K Route Switch Processor with 440G/slot Fabric and 6GB (TR) Transport Model

$11,994.95 Original Price: $48,000.00 75% off

Item #: A9K-RSP440-TR

Mfg Part #: A9K-RSP440-TR-RF

Shipping: Item will be shipped before or on 12/13/2018

Quantity:
Add to Cart
Add to Wishlist
  • Create a New List
Specifications
General
Item #A9K-RSP440-TR
Mfg Part #A9K-RSP440-TR-RF
Dimensions (L/W/H)31x20x6
Weight24 lbs
MSRP$48,000.00
BrandCisco Systems
Description

Product Overview

The Cisco ASR 9000 Series Route Switch Processor 440 (RSP 440) is a main system processor for Cisco ASR 9000 Series. It supports scalable, low-power, next-generation platforms, as well as required by today’s service provider networks.

Cisco ASR 9000 Series Routers offer one of the industry’s highest-capacity edge platforms, optimized for aggregation of dense 10 Gigabit Ethernet and 100 Gigabit Ethernet connections.

In addition to a higher capacity and scale, the Cisco ASR 9000 Series offers:

?   Distributed forwarding and control planes for higher performance

?   Network virtualization technology to provide excellent resilience and capacity expansion

?   Modularized system components in both hardware and software, isolating failure and faults to subsystems and components

?   Hardware-based signaling for the fabric, providing industry-leading resilience with zero packet loss on switchover

?   Built-in redundancy in hardware components such as the route switch processor (RSP), switch fabric, control-plane chassis control bus, and power supplies, thereby avoiding a single point of failure

?   Advanced network timing technologies support for precise frequency and time distribution throughout the network

?   Extensive selection of time-division multiplexing (TDM) and Ethernet interfaces for flexible deployment in multiservice edge (MSE) and RAN aggregation environments with packet- and circuit-based transport

 

A9K-RSP440-TR RSP

Route switch processor, bidirectional nonblocking fabric, controller, two 16-GB SSDs; includes the following:

?  Switch fabric
?   High-capacity full-duplex integrated dual-switch fabric
?   220 Gbps/slot with single RSP
?   440 Gbps/slot with dual RSP
?  Memory internal
?   6-GB Error-Correcting Code (ECC)-protected DRAM
?   Solid state disk: two 16-GB SSDs
?   8-GB embedded USB
?  Memory external
?   USB 2.0 Type A receptacle
?  Timing system
?   Timing: Two independent clock source connections
?   IEEE 1588 support: Copper 10/100-Mbps RJ-45 Ethernet port
?   GPS
?   ToD (RS422 and RS232)
?   1-pps RS422 or 1.0/2.3 50-ohm RF connector
?   10MHz in/out 1.0/2.3 50-ohm RF connector
?  Management
?   Two 100/1000 BASE-T (RJ-45) LAN management ports
?   One console port
?   One auxiliary port
?   Two 10-GE Small Form-Factor Pluggable Plus (SFP+) virtualization cluster ports
?  Alarms
?   Alarm outputs: Critical alarm (CR), major alarm (MJ), and minor alarm (MN)
?  LEDs
?   Amber alarm cut-off (ACO) and lamp test
?   System synchronization alarm (SYNC)
?   Compact Flash activity (CF)
?   Solid State Drive (SSD)
?   Fan tray visual indicator (UFAN/LFAN)

Return Policy

 

NETTECH ENTERPRISES, INC. RETURN GUIDELINES

All returns require an RMA (Return Merchandise Authorization) number, which can be obtained by contacting
our Customer Service department or clicking the “My Account” button in the top-right hand corner of our web page.

Please save all packaging and accessories for any item that is returned to Nettech. All original equipment, components, manuals,
cables, documents and packaging must be returned with your item in order for Nettech to process your RMA. An item
returned for a replacement may be repaired or replaced at Nettech’s discretion, unless otherwise required by law. Products with specific refund and return policies and deadlines must be returned within the time periods specified for each item. Physically damaged items cannot be returned.

Standard Nettech Corp Return Policy and Warranty

Products sold by Nettech are covered by our Standard Return Policy, unless otherwise indicated. Merchandise under our Standard Return Policy may be returned within 30 days of the original invoice date for a refund, or within 120 Days of the original invoice date for a replacement. All returns require an RMA (Return Merchandise Authorization) number.

Many manufacturers offer additional factory coverage; you should contact the manufacturer of your item directly for information regarding eligibility and specific Terms and Conditions.

ADDITIONAL RMA TERMS

Physical Damage Policy

Physically damaged items cannot be returned to Nettech, Corp.

Physical damage includes (but is not limited to) improper handling and any other type of damage sustained by irregular use.

If you return any physically damaged item to Nettech, the item will be returned to you at your expense.

Out-of-Stock (Back-Order) Items

Sometimes items are returned to Nettech after the product has been discontinued. You will be notified via email with two options: either Nettech can send you a comparable replacement item, or a refund of the current market value of the product will be issued. A current-market-value refund may not exceed the original invoice price. If the item is returned within 30 days of the original invoice date, a full refund will be issued.

You might be interested in these items