$$14,995.00Cisco Systems \ Routers \ ASR9K Router SeriesA9K-MPA-2X40GE
A9K-MPA-2X40GE-RF
A9K-MPA-2X40GE ASR9000 Modular Port Adaptor 2 x 40GbE Ports 40GECisco A9K-MPA-2X40GE ASR9000 Modular Port Adaptor W/ 2 x 40GbE Ports 40GE
A9K-MPA-2X40GE ASR 9000 2-port 40-Gigabit Ethernet Modular Port Adapter, requires QSFP optics Product Overview The Cisco ® ASR 9000 Series modular line cards provide customers with a flexible solution supporting multiple combinations of Ethernet ports, all in a single slot of the Cisco ASR 9000 Series Aggregation Services ...
Cisco SystemsCisco A9K-MPA-2X40GE

Cisco Systems

A9K-MPA-2X40GE ASR9000 Modular Port Adaptor 2 x 40GbE Ports 40GE

Cisco A9K-MPA-2X40GE ASR9000 Modular Port Adaptor W/ 2 x 40GbE Ports 40GE

Item #: A9K-MPA-2X40GE-RF

Mfg Part #: A9K-MPA-2X40GE

Specifications
General
Brand
Cisco Systems
Item #
A9K-MPA-2X40GE-RF
Mfg Part #
A9K-MPA-2X40GE
Dimensions (L/W/H)
10x10x6
Weight
4 lbs
MSRP
$75,000.00
Description

A9K-MPA-2X40GE

ASR 9000 2-port 40-Gigabit Ethernet Modular Port Adapter, requires QSFP optics

Product Overview

The Cisco® ASR 9000 Series modular line cards provide customers with a flexible solution supporting multiple combinations of Ethernet ports, all in a single slot of the Cisco ASR 9000 Series Aggregation Services Routers. Modular line cards support a wide range of interfaces and densities offering the benefits of network scalability with lower initial costs and ease of upgrades. The Cisco ASR 9000 modular line cards and modular port adapter portfolio continues the Cisco focus on investment protection along with consistent feature support, broad interface availability, and the latest technology.

Using the modular line cards, the Cisco ASR 9000 Series can support customer applications including video-on-demand, Internet Protocol Television (IPTV), point-to-point video, Internet video, and cloud-based computing. These line cards can also be used to deliver economical, scalable, highly available, line-rate Ethernet and IP/Multiprotocol Label Switching (IP/MPLS) edge services. The Cisco ASR 9000 Series line cards and routers are designed to provide the fundamental infrastructure for scalable Carrier Ethernet and IP/MPLS networks, supporting profitable business, residential, and mobile services

Features and Benefits

The Cisco ASR 9000 Series modular line cards are fully compatible with the Cisco ASR 9922, 9010, and 9006 systems, route switch processors (RSPs), and line cards. No hardware upgrade to the chassis or cooling system is required. Total bandwidth is dependent on the number and type of RSPs installed.

The new line cards deliver the ability to mix and match modular port adapters so that customers can customize each slot in the Cisco ASR 9000 to their specific port demands. As an example, a 4-port 10-Gigabit Ethernet modular port adapter can be matched with a 20-port 1-Gigabit Ethernet modular port adapter, all in a single slot.

Each Cisco ASR 9000 Series modular line card provides simultaneous support for both Layer 2 and Layer 3 services and features, helping operators to qualify and stock a single line card that can be deployed in any combination of Layer 2 and Layer 3 applications. These capabilities help to reduce capital expenditures (CapEx) and operating expenses (OpEx), as well as reduce the time required to develop and deploy new services. The Cisco modular line cards set a new standard for service density, allowing operators to offer predictable, managed transport services while optimizing the use of network assets.

The line cards, with their synchronization circuitry and dedicated backplane timing traces for accessing the RSP’s Stratum-3 subsystem, provide standards-based line-interface functions for delivering and deriving transport-class network timing, allowing support of network-synchronized services and applications such as mobile backhaul and time-division multiplexing (TDM) migration. Coupled with the Cisco RSP-440 route switch processor, the line cards can also be used for applications requiring IEEE 1588v2 synchronization services. Recognizing that real-time media dominate next-generation services, Cisco has integrated media-monitoring technology into the Cisco Modular line cards. This multimedia technology allows real-time monitoring and statistics collection of real-time video and voice flows, facilitating proactive maintenance and management of today’s interactive services.

Addressing the advantages of consolidating IP and dense wavelength-division multiplexing (DWDM) networking, G.709 with Advanced Forward Error Correction (FEC) is provided. G.709 provides visibility into the DWDM transmission system to permit rapid detection and recovery from transmission-layer and DWDM impairments. G.709 can also be configured for proactive protection if signal degradation is detected; it prevents traffic loss and link outage. Advanced FEC extends transmission-layer performance, delivering extended performance over an amplified system without the cost of regeneration or transponders.

Product Specifications

Description

Specification

Chassis compatibility

Compatible with the Cisco ASR 9922, 9010, 9006 and 9001 systems

Port density

Up to 2 modular port adapters are supported per line card..

Ethernet

?  IEEE 802.3 compliant
?  10 Gigabit Ethernet PHY monitoring
?  IEEE 802.x flow control
?  Full-duplex operation
?  Per-port byte and packet counters for policy drops; oversubscription drops; cyclic redundancy check (CRC) error drops; packet sizes; and unicast, multicast, and broadcast packets

Card density

Maximum number of line cards per system: Cisco ASR 9922 = 20, Cisco ASR 9010 = 8, and
Cisco ASR 9006 = 4

Options

Each line card is available as either a Service Edge Optimized (enhanced QoS) or Packet Transport

Optimized (basic QoS) line card.

Reliability and availability

Line card online insertion and removal (OIR) support without system impact

Return Policy

 

NETTECH ENTERPRISES, INC. RETURN GUIDELINES

All returns require an RMA (Return Merchandise Authorization) number, which can be obtained by contacting
our Customer Service department or clicking the “My Account” button in the top-right hand corner of our web page.

Please save all packaging and accessories for any item that is returned to Nettech. All original equipment, components, manuals,
cables, documents and packaging must be returned with your item in order for Nettech to process your RMA. An item
returned for a replacement may be repaired or replaced at Nettech’s discretion, unless otherwise required by law. Products with specific refund and return policies and deadlines must be returned within the time periods specified for each item. Physically damaged items cannot be returned.

Standard Nettech Corp Return Policy and Warranty

Products sold by Nettech are covered by our Standard Return Policy, unless otherwise indicated. Merchandise under our Standard Return Policy may be returned within 30 days of the original invoice date for a refund, or within 120 Days of the original invoice date for a replacement. All returns require an RMA (Return Merchandise Authorization) number.

Many manufacturers offer additional factory coverage; you should contact the manufacturer of your item directly for information regarding eligibility and specific Terms and Conditions.

ADDITIONAL RMA TERMS

Physical Damage Policy

Physically damaged items cannot be returned to Nettech, Corp.

Physical damage includes (but is not limited to) improper handling and any other type of damage sustained by irregular use.

If you return any physically damaged item to Nettech, the item will be returned to you at your expense.

Out-of-Stock (Back-Order) Items

Sometimes items are returned to Nettech after the product has been discontinued. You will be notified via email with two options: either Nettech can send you a comparable replacement item, or a refund of the current market value of the product will be issued. A current-market-value refund may not exceed the original invoice price. If the item is returned within 30 days of the original invoice date, a full refund will be issued.

You might be interested in these items