$$595.00APC \ Power Distribution \ PDUAP8961
AP8961-RF
AP8961 Rack Switched PDUAPC AP8961 Rack Switched PDU, Zero U
APC AP8961 Switched Rack PDU RACK PDU 2G, SWITCHED, ZEROU, 5.7KW, 200/208V, (21) C13 & (3) C19                                               ...
APCAPC 8961 Rack Switched PDU, Zero U

APC

AP8961 Rack Switched PDU

APC AP8961 Rack Switched PDU, Zero U

Item #: AP8961-RF

Mfg Part #: AP8961

Specifications
General
Brand
APC
Item #
AP8961-RF
Mfg Part #
AP8961
Dimensions (L/W/H)
72x4x4
Weight
18 lbs
MSRP
$1,125.00
Description

APC AP8961 Switched Rack PDU

RACK PDU 2G, SWITCHED, ZEROU, 5.7KW, 200/208V, (21) C13 & (3) C19
 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

APC Switched Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and active monitoring. Remote outlet level controls allow power on/off functionality for power recycling to remotely reboot equipment and restrict unauthorized use of individual outlets. Power sequencing delays allow users to define the order in which to power up or down attached equipment. Avoid circuit overload during power recovery and extend uptime of critical equipment by prioritizing the load shedding. Current metering provides real-time remote monitoring of connected loads. Switched Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and low profile circuit breakers. User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access, configure, and control Switched Rack PDUs through secure Web, SNMP, or Telnet Interfaces and is complimented by APC Centralized Management platforms using InfraStruxure Central, Capacity Manager and Change Manager.

Output

Nominal Output Voltage
208V
Maximum Total Current Draw per Phase
20A
Output Connections
(21) IEC 320 C13 IEC 320 C13
(3) IEC 320 C19 IEC 320 C19
Overload Protection
No

Input

Nominal Input Voltage
208V 3PH
Input Frequency
50/60 Hz
Regulatory Derated Input Current (North America)
16A
Input Connections
NEMA L21-20P
Cord Length
1.83 meters
Number of Power Cords
1
Maximum Line Current per phase
20A
Maximum Input Current per phase
20A

 

 

Return Policy

 

NETTECH ENTERPRISES, INC. RETURN GUIDELINES

All returns require an RMA (Return Merchandise Authorization) number, which can be obtained by contacting
our Customer Service department or clicking the “My Account” button in the top-right hand corner of our web page.

Please save all packaging and accessories for any item that is returned to Nettech. All original equipment, components, manuals,
cables, documents and packaging must be returned with your item in order for Nettech to process your RMA. An item
returned for a replacement may be repaired or replaced at Nettech’s discretion, unless otherwise required by law. Products with specific refund and return policies and deadlines must be returned within the time periods specified for each item. Physically damaged items cannot be returned.

Standard Nettech Corp Return Policy and Warranty

Products sold by Nettech are covered by our Standard Return Policy, unless otherwise indicated. Merchandise under our Standard Return Policy may be returned within 30 days of the original invoice date for a refund, or within 120 Days of the original invoice date for a replacement. All returns require an RMA (Return Merchandise Authorization) number.

Many manufacturers offer additional factory coverage; you should contact the manufacturer of your item directly for information regarding eligibility and specific Terms and Conditions.

ADDITIONAL RMA TERMS

Physical Damage Policy

Physically damaged items cannot be returned to Nettech, Corp.

Physical damage includes (but is not limited to) improper handling and any other type of damage sustained by irregular use.

If you return any physically damaged item to Nettech, the item will be returned to you at your expense.

Out-of-Stock (Back-Order) Items

Sometimes items are returned to Nettech after the product has been discontinued. You will be notified via email with two options: either Nettech can send you a comparable replacement item, or a refund of the current market value of the product will be issued. A current-market-value refund may not exceed the original invoice price. If the item is returned within 30 days of the original invoice date, a full refund will be issued.

You might be interested in these items